AT25080 |
RFQ for AT25080 Required Field |
 |
| Technical/Catalog Information | AT25080-10PC |
| Vendor | Atmel |
| Category | Integrated Circuits (ICs) |
| Memory Type | EEPROM |
| Memory Size | 8K (1K x 8) |
| Speed | 3MHz |
| Interface | SPI, 3-Wire Serial |
| Package / Case | 8-DIP |
| Packaging | Tube |
| Voltage - Supply | 4.5 V ~ 5.5 V |
| Operating Temperature | 0°C ~ 70°C |
| Format - Memory | EEPROMs - Serial |
| Drawing Number | * |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AT25080 10PC AT2508010PC |
| Product | Manufacturers | Pack | D/C |
| AT25080 | Atmel | 2003 | 8768 |
The AT25080/160/320/640 provides 8192/16384/32768/65536 bits of serial electri-cally erasable programmable read only memory (EEPROM )organized as 1024/2048/4096/8192 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operationare essential. The AT25080/160/320/640 is available in space saving 8-pin PDIP, JEDEC SOIC, and 14-pin and
20-pin TSSOP packages.
The AT25080/160/320/640 is enabled through the Chip Select pin (CS) and accessed via a 3-wire interface con-sisting of Serial Data Input (SI), Serial Data Output (SO),and Serial Clock (SCK). All programming cycles are com-pletely self-timed, and no separate ERASE cycle is required before WRITE.BLOCK WRITE protection is enabled by programming the status register with one of four blocks of write protection.Separate program enable and program disable instructions are provided for additional data protection. Hardware data protection is provided via the WP pin to protect against
inadvertent write attempts to the status register. The HOLD pin may be used to suspend any serial communication without resetting the serial sequence.
Features |
|
* Serial Peripheral Interface (SPI) Compatible* Supports SPI Modes 0 (0,0) and 3 (1,1)* Low Voltage and Standard Voltage Operation 5.0 (VCC = 4.5V to 5.5V) 2.7 (VCC = 2.7V to 5.5V) 1.8 (VCC= 1.8V to 3.6V)* 2.1 MHz Clock Rate* 32-Byte Page Mode* Block Write Protection Protect 1/4, 1/2, or Entire Array* Write Protect (WP) Pin and Write Disable Instructions for Both Hardware and Software Data Protection* Self-Timed Write Cycle (5 ms Typical)* High Reliability Endurance: 1 Million Write Cycles
Operating Temperature.................................. -55 to +125
Storage Temperature..................................... -65 to +150 Voltage on Any Pin with Respect to Ground..................................... -1.0V to +7.0V Maximum Operating Voltage........................................... 6.25V DC Output Current.............................................................5.0 mA *NOTICE: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent dam-age to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. SupplierPost a Buying LeadPDF / DatasheetRelated PDFRelated Models |
